IKEA SKÅDIS / SKADIS Hooks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hooks for the IKEA SKÅDIS boards. They tightly snap in and don't wiggle around. Different hook lengths are provided.
- Rating
- 4.885 / 5
- Likes
- 2,314
- Downloads
- 12,736
- Makes
- 196
- Views
- 35,976
- Reviews
- 157
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
These are hooks for the IKEA SKÅDIS boards. Unlike others I have seen these are made to snap in to the board and won't come loose or wiggle around.
I am making models with different hook lengths available here, from 10 mm to 50 mm in 5 mm increments.
Some slicing and printing optimisations:
I got good results with a 0.4 mm nozzle and 0.1 mm layer height.
I print the hooks “lying down” on their side.
Since there are some round fillet overhangs I enable supports.
In order to have the strongest hook possible I want to have 100% infill, and all the print lines aligned with the shape of the hook. Usually the 100% infill is a rectilinear pattern, which I think won't be as strong. In order to have the lines of plastic aligned with the shape of the hook I increased the number of perimeters such that the entire print will consist of perimeters. In Prusa Slicer: Print Settings → Layers and perimeters → Perimeters.