K1 Max Glass Lid Raiser with Sliding Vents & TPU Gaskets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a small profile lid raiser with TPU gasket and sliding vent
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 97
- Wydruki
- 2
- Wyświetlenia
- 799
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I was looking for a low profile lid raiser and RobertCowanDIY design the Creality K1 Max Lid Riser - No logo, slimmer vents got my attention.
I just wanted extra security for the glass thus I remixed it by adding an additional 2.5mm to the glass grove at top. This allowed me to add a 2mm TPU gaskets all around the frame. I used superglue to glue the TPU to the frame permanently.
However, after printing I had a 2.8mm gaps in every corner, so I increased the size by 2.8mm to make the frame fits more firmly.
Printed with ASA, the final print set on top of the printer firmly and adds only a 3.25cm to printer height, have a functional air vent and an add security to the glass.