1 / 8
lid raiser for Creality K2 plus (2025-02-22 added VE2) — zdjęcie 1
1 / 8

lid raiser for Creality K2 plus (2025-02-22 added VE2)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

basic lid raiser for Creality K2 plus with ventilation sliders

Ocena
5 / 5
Polubienia
241
Pobrania
2319
Wydruki
19
Wyświetlenia
8679
Oceny
13

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

simple, basic lid raiser for Creality K2 plus

Raises the glass lid by 40mm so that the bowden tube no longer rubs against the glass.
Adds the option of ventilation.

The ventilation sliders are inserted into the front, back and side sections.
An M3 screw is used as adjustment knob for ventilation opening (most usefull is a socket head cap screw).
Add some self-adhesive foam or rubber tape as support for the glass cover.

Because higher temperatures can occur in the heated chamber of the K2 plus, it is recommend printing the raiser with a material that can withstand these temperatures.

edit 2025-02-22: added new version VE2 
user requested improvements:
- more ventilation: slightly enlarged slots; smaller corners so 2 more slots on each side
- optionally the parts can be screwed together to increase rigidity (M3x8 button-head screws)
- increased tolerance of the sliders for easier movement
 

print settings:
printed on Creality K2 plus with eSUN eABS-GF
optimized for 0.4 mm nozzle ; 0.2 mm layer height ; 3 walls
8% rectilinear infill,  sliders 15% rectilinear infill
no support needed

I had no problems with bed adhesion or warping with this filament so mouse ear was enough,
but it is up to you to eventually use a brim.
 

included STEP files to easy modify

happy printing, have fun!

IF THERE ARE ISSUES WITH THE DESIGN PLEASE LEAVE A COMMENT OR SEND ME A MESSAGE

Tagi