1 / 3
12 mm Ear Gauge and Tunnel Holder — zdjęcie 1
1 / 3

12 mm Ear Gauge and Tunnel Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I couldn't find anything that would keep all my gauges and tunnels in one place other than an old coffee cup.

Ocena
5 / 5
Polubienia
28
Pobrania
161
Wydruki
1
Wyświetlenia
1118
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I couldn't find anything that would keep all my gauges and tunnels in one place other than an old coffee cup. Even then I had to dig around for what I was looking for. I designed this for personal use but figured I would put this up for people to mix up.

This is for 12mm. If you make a customizer or remix, please credit me so I can see what you've done with it.

If you found this useful, I would appreciate a comment on how it worked for you and please consider tipping. Thanks, and enjoy!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Supports:

Yes

Resolution:

.28 is what I used.

Infill:

5-15% You don't need a lot.

Filament:

N/A PLA

N/A


Notes:

Your mileage may vary on supports. I needed to use them so the undersides of the tunnel posts didn't droop because my machine wasn't dialed in at the time.

Category: Earrings

Tagi