1 / 6
Wooden train tunnel "Eye of gods" compatible to IKEA set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wooden train tunnel. Designed to be compatible to IKEA wooden train set.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 288
- Wydruki
- 4
- Wyświetlenia
- 844
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (92)Powiązane
Model can be printed without supports and brim - all angles are printable, in roof added internal supports.
Printed with 3 layers on perimeter.
Shared 2 versions:
- Wooden_train_tunnel - classic tunnel.
- Wooden_train_tunnel_for_bridge_connection - Special addition, if you are using bridge column ( https://www.printables.com/model/459565-wooden-train-bridge-column-compatible-to-ikea-set ) from my designs and want to do long connected bridge (without spaces) from these tunnels - print this model. Example can be seen on the last picture. This model can be used also without columns.
P.S. You can also found other my wooden train designs here: https://www.printables.com/@KDima_195732/collections/615094
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.35
Infill:
20%
Filament: Prusament PLA RED
Category: Construction Toys