Filament Dry Box IKEA Samla 22L - Base Tower +20/ +25 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
3,48 € – 4,26 € netto (bez VAT)
Dla pliku: Base Tower V3_0.2mm_PETG_MK3S_4h0m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,87 € netto (środek widełek).
- Masa podana przez autora
- 49 g
- Czas druku podany przez autora
- 4 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Higher feet to fit bigger Silicagel bags/boxes and save material + print time
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 185
- Wydruki
- 6
- Wyświetlenia
- 1405
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Modification of Base Towers for Filament Drybox Ikea Samla 22L from pixelwave. Printed out already 4 Boxes and I am very happy about them!
Just rised feet to fit bigger Silicagel Boxes or Drybags under the spools. Mine are Hysure 400 and 500, which I bought very cheap and are able to be dryed by 230V.
Mine are printed from PETG - see the .gcode
First V1:
- +20mm to original Base Towers
Update V2 21.6.2022:
- +25mm (extra 5mm)
- optimized angle to Samla box wall
- There is no reason to use the old +20mm version, as there should be still the clearance between standard spool and lid about 5mm.
Update V3 22.6.2022:
- 25mm version to save material, weight and print time