1 / 4
IKEA RÅSKOG trolley paper towel holder — zdjęcie 1
1 / 4

IKEA RÅSKOG trolley paper towel holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Based on the modular hook and clip system for IKEA Raskog trolleys, this is a compatible paper towel holder for US…

Ocena
0 / 5
Polubienia
24
Pobrania
136
Wydruki
0
Wyświetlenia
1194
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Based on the modular hook and clip system for IKEA Raskog trolleys, this is a compatible paper towel holder for US jumbo rolls. It consists of two brackets, a threaded dowel (with a flat spot for support-less printing), and two M18-threaded knobs that screw into the dowel. Prints on one plate as a sturdy set.

This needs a set of clips (see https://www.prusaprinters.org/prints/38456-ikea-raskog-trolley-locking-clips) in order to mount them to the trolley.

Openscad file included for your tinkering needs.

Please share if you made one, i'd appreciate it!

Print instructions

Printed in PETG, 0.2mm layer height, 2 perimeters, no supports, no brim, 15% infill. The model is plated and ready to go, just load it up and print.

Tagi