Assembly part for IKEA MALM Bed #122998
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
During a move, I lost 2 assembly parts for a Ikea MALM bed. So I designed and 3D Printed them
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The part has Ikea reference #122998 and you need 4
I know we can find them in any Ikea, But the nearest shop was too far and wanted to use my trusty Prusa MINI+ and reassemble the bed quickly
I didn't reproduce the exact shape of the part but made a simple design (Left side in the picture below)
Design is very simple. The radius is 24mm (Hole diameter 48mm) and the diameter screw is 8mm
For printing, I used Prusament PETG Jet Black and printed with 4 perimeters. Other parameters are the standard ones from PrusaSlicer
The replacement part fits perfectly and bed assembly is secured. I'll have to replace the standard nuts by ones with “flanges” as original nuts.
On top of .stl and .3mf files, I uploaded Fusion 360 .f3d and.step files so you can modify the design and adapt it to your needs.
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes.
You can also look at other Ikea parts I designed and 3D printed
Enjoy
If you like this model, take a look also at my other designs in Printables.