1 / 4
Ikea Skadis Bottle Holder 55mm ID 3D Lac — zdjęcie 1
1 / 4

Ikea Skadis Bottle Holder 55mm ID 3D Lac

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MKE Dan's Skadis bottle series and made one size bigger. Fits 55mm or 2-1/8" inside diameter.

Ocena
5 / 5
Polubienia
29
Pobrania
207
Wydruki
6
Wyświetlenia
573
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a slightly bigger inside diameter to house a larger bottle. In my case it was a 3DLac aerosol can with a 2-1/16" diameter. MKE Dan's models looked great so I remixed it to be a bit taller, and with a 55mm inside diameter. 

 

I printed it in Matter3D Basics PLA at 0.30mm with 4 perimeters, 0.40mm nozzle supports on bed only

 

 

Tagi