IKEA SKADIS Shelf Edge or Whiteboard Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom hook for mounting IKEA Skadis pegboards on whiteboards or as a wardrobe connector replacement
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model Description
I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created my own. The model is a hook with Skadis-compatible pins on the front.
IKEA itself offers a variant for attaching the board to wardrobes, which is essentially the same as this hook without the back. So I also made a modified version that can be used as a replacement for the original connector for wardrobe.
Variants
Because of the different widths of whiteboards or shelf edges, I created variations of the two hooks.
Whiteboard Mount
- 14mm width
- 18mm width
- 24mm width
Shelf / Wardrobe Mount
- 16mm width
- 24mm width
Printing
Here are my recommended printer settings:
| Parameter | Setting |
| Material | PETG |
| Infill | 40% |
| Layer | 0.2 mm |
| Support | for the two pegboard hooks, organic shape |
I suggest the following positioning on the print bed:
My configuration used approximately 12g of filament and the print took 52 minutes at an estimated cost of €0.32.
Installation
Use two hooks to attach the SKADIS to your whiteboard. You will need to use additional spacers for the bottom of the board. The regular spacers supplied by the manufacturer are too long. You can use, e.g., @jcq_194086's Ikea Skadis Spacer or @3DMorris's IKEA Skadis Spacer (shorten them in your slicer if necessary).
Whiteboard
Attach the hooks to one of the top layers of your SKADIS and hang the pegboard over your whiteboard. No tools or tape needed.
Shelf
Use double-sided tape on the underside to attach the hooks to a shelf or the top of your wardrobe. As long as you don't place anything particularly heavy on your pegboard, you should have no problems.
Custom Sizes
Drop me a line if you need a custom size and I will do my best to add another variation to the collection.
Your Feedback is Welcome
Have fun printing! Feel free to leave a like, a comment, a review and a picture of your make.