1 / 2
IKEA BEKANT Desk Floor-Wall Spacer/ Abstandshalter Ikea Bekant — zdjęcie 1
1 / 2

IKEA BEKANT Desk Floor-Wall Spacer/ Abstandshalter Ikea Bekant

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,13 € – 1,38 € netto (bez VAT)

Dla pliku: desk-floor-spacer-long3mf_0.4n_0.2mm_PLA_MK4IS_43m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,25 € netto (środek widełek).

Masa podana przez autora
27 g
Czas druku podany przez autora
42,6 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Abstandshalter für Schreibtische von Ikea

Ocena
5 / 5
Polubienia
17
Pobrania
102
Wydruki
2
Wyświetlenia
1027
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

Auf Laminat stehen die Schreibtische nicht am Platz. Gerade bei der Höhenverstellung ist ein Abstand zur Wand wichtig . Das ist ein Abstandshalter für Ikea Bekant, passt wohl auch auf andere Schreibtische Breite Innenmaß  80 mm. Vorne ist eine runde Nut für einen Gummipfropfen. 

The desks are out of place on laminate. A distance from the wall is particularly important when adjusting the height. This is a spacer for Ikea Bekant, probably also fits other desks with an internal width of 80 mm. At the front there is a round groove for a rubber stopper.

Tagi