Gridfinity Baseplate for Ikea BESTA Drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customized Gridfinity Baseplate for Ikea BESTÅ Drawers, pre-cut for medium sized print beds.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 287
- Wydruki
- 9
- Wyświetlenia
- 1445
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a complete baseplate to fill any 60x40 drawer for Ikea BESTA (link)
After filling a few of my Ikea ALEX drawers with Gridfinity bins, I decided to do the same for other drawers I have at home (shocking)
There were no baseplate designs for some of the Ikea furniture I have so I decided to learn to model them.
After many iterations and a lot of PETG wasted, I managed to find a good balance of tightness and fit for these drawers without any extra postprocessing necessary.
Total measurements: 514 x 327 mm
You need to print each model once to fill a drawer, so a total of 6 prints. The last two letters of each STL set the position of each print over the drawer looked from the front.
- GridFinityBase_BESTA_FL (Front Left)
- GridFinityBase_BESTA_FM (Front Middle)
- GridFinityBase_BESTA_FR (Front Right)
- GridFinityBase_BESTA_BL (Back Left)
- GridFinityBase_BESTA_BM (Back Middle)
- GridFinityBase_BESTA_BR (Back Right)
And believe me, I really tried to also upload a 4 piece version for 256x256 plates but the last iterations didn't fit for something close to 1mm…