Mistral TV bench door mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement door mounts
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement mounting bracket for my “Mistral” TV bench. The original mount is screwed directly into the shelf-holes and somehow they end up working themselves out of those hole - eventually ruining the holes and making them too big for the screws.
This replacement mount makes it possible to mount the door using the remaning, unused, shelf holes. It's a fix with a limited lifespan as it'll surely happen with these new holes as well, but at least there's 2 extra holes per side that it can destroy now.
The original brackets are identical as they were lazy and just turn the right one upside down. This doesn't work with this asymmetrical bracket, so you need to print both the left and right version.
All this mod requires is an M4 bolt and nut for mounting the hinge to the bracket where the hole in the bench in busted and can't be used properly.
Prints fine however you like. I used the default PLA settings on 0.20mm SPEED on my MK4.