1 / 1
Fermion — Hot glue mold to repair your cables
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use hot glue to fix any problem in your life!
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 789
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (31)Powiązane
Here you have my take on the injection-molding idea. It is heavily inspired on this video, be sure to check it out.
I recommend printing with TPU. Use as follows:
- Print both pieces.
- Put some vegetable oil with a light coating on both pieces of the mold.
- Insert your cable in the bottom piece, closing with the top.
- Heat up your hotglue gun – for at least ten minutes for the best results.
- Firmly push nozzle to the chamfered hole on the side and put as much glue as it can be injected, until it spills out.
- Wait two to four minutes before opening the mold.
- Cut the excess; you can reuse the mold if needed.
Don't try using the mold with no releasing agent (such as oil), as it will weld it shut.
Made with ♡ in Ukraine
By Anton Soliaryk
Ось мій погляд на ідею лиття гарячим клеєм.
Рекомендую друкувати ТПУ. Використовуйте наступним чином:
- Роздрукуйте обидві частини.
- На обидві частини форми нанесіть трохи рослинної олії легким шаром.
- Вставте кабель у нижню частину, закриваючи верхню.
- Нагрійте пістолет для гарячого клею – принаймні десять хвилин для досягнення найкращих результатів.
- Сильно притисніть насадку до скошеного отвору збоку та нанесіть стільки клею, скільки можна впорснути, доки він не витече.
- Зачекайте дві-чотири хвилини, перш ніж відкрити форму.
- Зріжте зайве; ви можете використовувати форму повторно, якщо це необхідно.
Не намагайтеся використовувати прес-форму без розчинника (наприклад, масла), оскільки це зварить її.
Зроблено з ♡ в Україні
Антон Солярик