Volkswagen Golf / Skoda Octavia front speaker adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that allows you to fit 17cm/6.5" speakers in place of the bigger front door speakers on a Mk5 Golf etc.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 333
- Wydruki
- 0
- Wyświetlenia
- 1973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I needed a way of fitting aftermarket speakers in the front doors of a Skoda Octavia 2 so I came up with these adapters. They'll allow you to fit standard 17cm/6.5" speakers at the same height as the originals. You'll have to drill out the rivets holding the original speaker, then use m4 nuts and bolts to fit this adapter.
I recommend using petg and for print settings I used 0.3mm layer height (but anything should be OK), 15% cubic infill was fine and it needs supports.
If you found this model useful please click the 'like' button and upload a photo of your print. Also, comments and suggestions are always welcome.
I've included the f3d and step files in case anyone wants to modify my design.