SV08 bambulab clone hotend V6 nozzle adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another bambulab clone hotend with v6 nozzle adapter
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 970
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Freely inspired by stephzic (https://www.printables.com/fr/model/932579-sovol-sv08-bambulab-hotend-support) and DrewDeeDoo (https://www.printables.com/fr/model/989777-sv08-upgrade) but neither have the correct height for my bambulab clone with v6 nozzle. And some doesn't allow remix, so I have done this from scratch.
It is design especially to be use with SV08 Halo, which allow to have the 2510 fan at the correct height : https://www.printables.com/model/1000808
There's two versions:
- One to use with the original probe mounted
- The other to use without the original probe, in case you use only BTT Eddy
There's a picture to show how to orient it in your slicer. It is possible to print it without support. If you want to use support, do manual support only for the side arm. Avoid to use support on the screws holes.
This model has to be tested. Your feedback is welcome !