Multi-Function Tester -TC1 Tool Insert for Corrugated Gridfinity Light Bin 2x3x6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-Function Tester -TC1 Tool Insert for "Corrugated Gridfinity Light" Bin size 2x3x6
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
DESCRIPTION
Remix of :
Blank Insert Reinforced Lids by ImprovedByDesign Tool Holder For Multi-function Tester - TC1
Compatibility:
Compatible with size 2x3x6+ Double Lip Corrugated Gridfinity Light Bins and the original Corrugated Gridfinity Light Bins.
Printing:
I printed PETG with .6mm nozzle and .3mm height. No supports but should have made a small change as I had some droopy bridging since I was printing HOT but did not make for an unusable print.
Design:
Used 1.2mm walls since I use a .6mm nozzle
I should have extended the reinforcement legs lower to touch the bottom of the full size “6” bin (the original only had length for size 3 bins to touch.) Not critical, but if the bin moves I might add a dab of hot glue in the corners then reseat the insert to the bin.
Feel free to make modifications. https://cad.onshape.com/documents/4cda3d72e47c8d6854605c2a/w/9f4fec8f0a95adbe5d8fb178/e/8d8dc949751d87584dfdf7bb