Filament spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament spool holder for spools in diameter from 145 mm to 220 mm. You can adjust the with of the holder by pushing…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Filament spool holder for spools in diameter from 145 mm to 220 mm. You can adjust the with of the holder by pushing the two parts more together. The maximum spool width can be up to 75 mm.
Also, the spool holder fits nicely on the controller box of the Creality3D - CR10s. Every other controller box with a width of 125mm will do, too.
I had 6003 ball bearings lying around. Print the part twice to have one full holder.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
No
Resolution:
0.2
20%
Filament: ? PLA doesn't matter
Notes:
the g-code file prints well on my printer, break away the brim, push the bearings on, join the pieces, set to width, done.
The printing is done with a 0.4mm nozzle, 40°C bed temperature and printing in 210°C-220°C.Because of issues with the material I had to use quite high temperatures.
Category: 3D Printer Accessories