Better Elegoo Saturn 4 Door Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This door handle is better than any I've seen. Mounts horizontal and centered like it should.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 956
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a better handle for the Elegoo Saturn 4 Ultra. It mounts in the center horizontally. Unlike other handles that mount in the vertical position because designers could handle the weird angles on the front of the printer. Has a backing plate that serves to disperse the forces of the handle. Once installed, you'll enjoy easy opening with a comfortable fitting handle that also serves to make the door more rigid and smooth operating. Mounts with simple, easy to find hardware. Can be printed either on the Elegoo Saturn 4 Ultra or an FDM printer if you prefer. The debossed letters can easily be filled to provide a great matching appearance with your printer. Any resin or filament will do the job but I have some higher quality suggestions below.
HARDWARE:
2) M4 X 30 Button Head Cap screws
2) M4 washers (preferably large fender washers)
2 M4 hex nuts
RECOMMENDED RESIN/FILAMENT:
Siraya Tech Build 3D Printer Resin - Smokey Black (matches the door almost perfectly)
3DXTech PETG+CF
TOOLS:
3mm hex key
5mm drill bit (to drill hole in Elegoo door; allows for a bit of play)
4.5mm drill bit (to chase holes in handle and/or backplate if necessary)
Drill