Better Elegoo Saturn 4 Door Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This door handle is better than any I've seen. Mounts horizontal and centered like it should.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 167
- Makes
- 0
- Views
- 958
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a better handle for the Elegoo Saturn 4 Ultra. It mounts in the center horizontally. Unlike other handles that mount in the vertical position because designers could handle the weird angles on the front of the printer. Has a backing plate that serves to disperse the forces of the handle. Once installed, you'll enjoy easy opening with a comfortable fitting handle that also serves to make the door more rigid and smooth operating. Mounts with simple, easy to find hardware. Can be printed either on the Elegoo Saturn 4 Ultra or an FDM printer if you prefer. The debossed letters can easily be filled to provide a great matching appearance with your printer. Any resin or filament will do the job but I have some higher quality suggestions below.
HARDWARE:
2) M4 X 30 Button Head Cap screws
2) M4 washers (preferably large fender washers)
2 M4 hex nuts
RECOMMENDED RESIN/FILAMENT:
Siraya Tech Build 3D Printer Resin - Smokey Black (matches the door almost perfectly)
3DXTech PETG+CF
TOOLS:
3mm hex key
5mm drill bit (to drill hole in Elegoo door; allows for a bit of play)
4.5mm drill bit (to chase holes in handle and/or backplate if necessary)
Drill