1 / 4
DT Swiss 350 Front Hub Spacers - 15x100mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These spacers allow you to run a 15x100mm front axle on a DT Swiss 350 road hub.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these spacers to fit a DT Swiss 350 front road hub and allow me to run my current wheel on a 15x100mm fork.
Spacers print quickly with no supports. The ID is oversized by about 0.5mm to account for shrinkage when printing with ASA. I have included the Fusion design in case you need to adjust.
Recommend ASA or ABS, but PETG might work as well.
I printed at 0.1mm layer height to make them look better. 0.2mm should be sufficient.
