1 / 4
DT Swiss 350 Front Hub Spacers - 15x100mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These spacers allow you to run a 15x100mm front axle on a DT Swiss 350 road hub.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I designed these spacers to fit a DT Swiss 350 front road hub and allow me to run my current wheel on a 15x100mm fork.
Spacers print quickly with no supports. The ID is oversized by about 0.5mm to account for shrinkage when printing with ASA. I have included the Fusion design in case you need to adjust.
Recommend ASA or ABS, but PETG might work as well.
I printed at 0.1mm layer height to make them look better. 0.2mm should be sufficient.
