Capacitor mount snap in for lift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this to move large snap in capacitors that need to be lifted off the board, specifically for the JJP power…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I made this to move large snap in capacitors that need to be lifted off the board, specifically for the JJP power board. This is made for a 35mm diameter capacitor with 10mm leads spacing. Holes are larger than necessary to allow extentions to be soldered onto it.
update: I enlarged the lead holes to 4.5 mm and lenghtened the standoff to 18mm high. I've also made a "Tesla" version.I've also removed the lip on the larger portion as removing the support material was difficult. I've added a 15mm spacer as well. Print large diameter down on the print plate.
Category: Electronics