Capacitor mount snap in for lift
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this to move large snap in capacitors that need to be lifted off the board, specifically for the JJP power…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I made this to move large snap in capacitors that need to be lifted off the board, specifically for the JJP power board. This is made for a 35mm diameter capacitor with 10mm leads spacing. Holes are larger than necessary to allow extentions to be soldered onto it.
update: I enlarged the lead holes to 4.5 mm and lenghtened the standoff to 18mm high. I've also made a "Tesla" version.I've also removed the lip on the larger portion as removing the support material was difficult. I've added a 15mm spacer as well. Print large diameter down on the print plate.
Category: Electronics