Apple C to barrle overmold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hot glue overmold for the apple usb c to headphone jack adapter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hot glue overmold to strengthen or repair apple's usb c to headphone jack adapter.
I personally don't like the fact that a lot of these adapter use a flimsy wire between the ports,
with this mod it will be a lot stronger.
make shure to cover all inside surfaces with petroleum jelly
You can use a bit of dish soap to clean this off the finished dongle later.
I recomend to first test the mold without a dongle and time how long it takes for your glue to harden, mine took around 20 minutes to fully harden.
This design does not have any regestration features, I clamped it down and adjusted it a bit until it was aligned propperly.
The top part is a mirror image of the bottom.
Printed on bambu A1
Pla, 0.4 mm nozzle, 0.2mm layer height