Apple C to barrle overmold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hot glue overmold for the apple usb c to headphone jack adapter
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hot glue overmold to strengthen or repair apple's usb c to headphone jack adapter.
I personally don't like the fact that a lot of these adapter use a flimsy wire between the ports,
with this mod it will be a lot stronger.
make shure to cover all inside surfaces with petroleum jelly
You can use a bit of dish soap to clean this off the finished dongle later.
I recomend to first test the mold without a dongle and time how long it takes for your glue to harden, mine took around 20 minutes to fully harden.
This design does not have any regestration features, I clamped it down and adjusted it a bit until it was aligned propperly.
The top part is a mirror image of the bottom.
Printed on bambu A1
Pla, 0.4 mm nozzle, 0.2mm layer height