Food gripper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for a Starfrit Spiralizer
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This vegetable gripper is a replacement part for the Starfrit Spiralizer It prints in two parts to retain an M6 x 40 stainless steel hex head bolt. The two halves were glued with original Gorilla Glue which expands as it dries. The assembly was coated with a food grade epoxy so that it is sealed and can be hand washed.
You can make adjustments to the OpenScad file for the gripper size. Here are the parameters that I used.

If you want to slice the STL file yourself, cut the model at 12 mm from the base. This will allow you to insert the bolt. I used PrusaSlicer with the Frustum connectors to orient the two parts together for glueing. Here are my settings:
