1 / 6
Food gripper — image 1
1 / 6

Food gripper

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement part for a Starfrit Spiralizer

Rating
0 / 5
Likes
10
Downloads
20
Makes
0
Views
590
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

This vegetable gripper is a replacement part for the Starfrit Spiralizer It prints in two parts to retain an M6 x 40 stainless steel hex head bolt.  The two halves were glued with original Gorilla Glue which expands as it dries. The assembly was coated with a food grade epoxy so that it is sealed and can be hand washed.

You can make adjustments to the OpenScad file for the gripper size.  Here are the parameters that I used.

If you want to slice the STL file yourself, cut the model at 12 mm from the base.  This will allow you to insert the bolt.  I used PrusaSlicer with the Frustum connectors to orient the two parts together for glueing.  Here are my settings:

 

Tags