MGT Compatible Magnetic Tablecloth Pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic system designed to keep your tablecloth from sliding off your MGT.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed to be compatible with Wyrmwood's Modular Gaming Table. It allows for a tablecloth to be pinned to the table, preventing it from sliding off.
The MagAdapter is designed to accept 3/8"x1/8" round magnets. I purchased these countersunk magnets from totalelement. There is also a cavity to accept 3m x 0.5mm heat-set inserts to secure the magnets to the MagAdapter part. These screws work perfectly with the magnets and inserts
The MagPin accepts 2 15mmx2mm round magnets and are friction fit.
For each Pair of parts you will need:
- 4x 3mx0.5mm heat-set inserts
- 4x 3/8"x1/8" countersunk magnets
- 4x m3 countersunk screws
- 2x 15mmx2mm round magnets