MGT Compatible Magnetic Tablecloth Pin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic system designed to keep your tablecloth from sliding off your MGT.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 30
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed to be compatible with Wyrmwood's Modular Gaming Table. It allows for a tablecloth to be pinned to the table, preventing it from sliding off.
The MagAdapter is designed to accept 3/8"x1/8" round magnets. I purchased these countersunk magnets from totalelement. There is also a cavity to accept 3m x 0.5mm heat-set inserts to secure the magnets to the MagAdapter part. These screws work perfectly with the magnets and inserts
The MagPin accepts 2 15mmx2mm round magnets and are friction fit.
For each Pair of parts you will need:
- 4x 3mx0.5mm heat-set inserts
- 4x 3/8"x1/8" countersunk magnets
- 4x m3 countersunk screws
- 2x 15mmx2mm round magnets