1 / 1
"How To Print Glass" Cura profile (based on work of Rygar1432) — zdjęcie 1

"How To Print Glass" Cura profile (based on work of Rygar1432)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Untested and unsure translation of Rygar1432 settings into Cura settings

Ocena
5 / 5
Polubienia
19
Pobrania
122
Wydruki
0
Wyświetlenia
1317
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution

I tried to translate settings posted by Rygar1432 in “How To Print Glass” into Cura settings. I probably made some mistakes and I didn't tested them, but I decidet to post them anyway (feel free to correct me in comments).

A also recommend watching "CNC Kitchen" video, because you might wanna try other settings than the ones proposed by Rygar1432: https://www.youtube.com/watch?v=9qb25Gi4Jv0

Here are the settings:

Cura: Firstly I selected Material to Generic PETG

Original: 0.1000mm layer height
Cura: Quality > Layer Height


EXTRUDER
Original: Nozzle Diameter: 0.40 mm
Cura: Nozzle Size

Original: Extrusion Multiplier: 1.01
Cura: Material > Flow 101

Original: Extrusion Width: 0.50 mm
Cura: Quality > Line Width

Original: Retraction Distance: 3.05 mm
Cura: Travel > Retraction Distance

Original: Retraction Speed: 30.00 mm/s
Cura: Travel > Retraction Speed

Original: Coasting Distance: 1.00 mm
Cura: Experimental > Enable Coasting (I didn't found anything setting to set distance directly so I just enabled coasting and left default options)

Original: Wipe Distance: 3.00 mm
Cura: Walls > Outer Wall Wipe Distance
Cura: Infill > Infil Wipe Distance

LAYER
Original: Primary Layer Height: 0.1000 mm
Cura: Quality > Initial Layer Height

Original: Top Solid Layers: 0
Cura: Top/Bottom > Top Layers

Original: Bottom Solid Layers: 0
Cura: Top/Bottom > Bottom Layers

Original: Outline/Perimeter Shells: 2
Cura: Walls > Wall Line Count

INFILL
Original: Interior Fill Percentage: 100%
Cura: Infill > Infill Density

Original: Outline Overlap 35%
Cura: Infill > Infill Overlap Percentage

Original: Infill Extrusion Width: 103%
Cura: Quality > Infill Line Width: 0.515 (5*1.03)


Original: Internal Infill Angle Offset: -45
THE INFILL MUST NOT ALTERNATE EACH LAYER. EVERY LAYER MUST BE LAID DOWN THE SAME DIRECTION.
Cura: Infill > Infill Line Directions: [-45] (I guess the angle don't need to be -45, but it just need to be set to one value)

TEMPERATURE
Original: Hot End: 265c
Cura: Material > Printing Temperature

Original: Hot Bed: 70c
Cura: Material > Build Plate Temperature

COOLING
Original: NO! This will cloud the print.
Cura: Cooling > Enable Print Cooling

SPEED
Original: Default Printing Speed: 20.0 mm/s
Cura: Speed > Print Speed

Original: Outline Underspeed: 50%
Cura: Speed > Outer Wall Speed: 10 (it is already set afret setting Print Speed)

Original: Solid Infill Underspeed: 30%
Cura: Speed > Infill Speed: 6

Original: Support Structure Underspeed: 80%
Cura: Support > Enable Support (if you want…)
Cura: Speed > Support Speed: 16

Original: X/Y Axis Movement Speed: 150.0 mm/s
Cura: Speed > Travel Speed

Original: Z Axis Movement Speed: 20.0 mm/s
Cura: Speed > Z Hop Speed (I cant set anything above 4, but it doesn;t seem to by too important)

Tagi