"How To Print Glass" Cura profile (based on work of Rygar1432)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Untested and unsure translation of Rygar1432 settings into Cura settings
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 122
- Makes
- 0
- Views
- 1,317
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
I tried to translate settings posted by Rygar1432 in “How To Print Glass” into Cura settings. I probably made some mistakes and I didn't tested them, but I decidet to post them anyway (feel free to correct me in comments).
A also recommend watching "CNC Kitchen" video, because you might wanna try other settings than the ones proposed by Rygar1432: https://www.youtube.com/watch?v=9qb25Gi4Jv0
Here are the settings:
Cura: Firstly I selected Material to Generic PETG
Original: 0.1000mm layer height
Cura: Quality > Layer Height
EXTRUDER
Original: Nozzle Diameter: 0.40 mm
Cura: Nozzle Size
Original: Extrusion Multiplier: 1.01
Cura: Material > Flow 101
Original: Extrusion Width: 0.50 mm
Cura: Quality > Line Width
Original: Retraction Distance: 3.05 mm
Cura: Travel > Retraction Distance
Original: Retraction Speed: 30.00 mm/s
Cura: Travel > Retraction Speed
Original: Coasting Distance: 1.00 mm
Cura: Experimental > Enable Coasting (I didn't found anything setting to set distance directly so I just enabled coasting and left default options)
Original: Wipe Distance: 3.00 mm
Cura: Walls > Outer Wall Wipe Distance
Cura: Infill > Infil Wipe Distance
LAYER
Original: Primary Layer Height: 0.1000 mm
Cura: Quality > Initial Layer Height
Original: Top Solid Layers: 0
Cura: Top/Bottom > Top Layers
Original: Bottom Solid Layers: 0
Cura: Top/Bottom > Bottom Layers
Original: Outline/Perimeter Shells: 2
Cura: Walls > Wall Line Count
INFILL
Original: Interior Fill Percentage: 100%
Cura: Infill > Infill Density
Original: Outline Overlap 35%
Cura: Infill > Infill Overlap Percentage
Original: Infill Extrusion Width: 103%
Cura: Quality > Infill Line Width: 0.515 (5*1.03)
Original: Internal Infill Angle Offset: -45
THE INFILL MUST NOT ALTERNATE EACH LAYER. EVERY LAYER MUST BE LAID DOWN THE SAME DIRECTION.
Cura: Infill > Infill Line Directions: [-45] (I guess the angle don't need to be -45, but it just need to be set to one value)
TEMPERATURE
Original: Hot End: 265c
Cura: Material > Printing Temperature
Original: Hot Bed: 70c
Cura: Material > Build Plate Temperature
COOLING
Original: NO! This will cloud the print.
Cura: Cooling > Enable Print Cooling
SPEED
Original: Default Printing Speed: 20.0 mm/s
Cura: Speed > Print Speed
Original: Outline Underspeed: 50%
Cura: Speed > Outer Wall Speed: 10 (it is already set afret setting Print Speed)
Original: Solid Infill Underspeed: 30%
Cura: Speed > Infill Speed: 6
Original: Support Structure Underspeed: 80%
Cura: Support > Enable Support (if you want…)
Cura: Speed > Support Speed: 16
Original: X/Y Axis Movement Speed: 150.0 mm/s
Cura: Speed > Travel Speed
Original: Z Axis Movement Speed: 20.0 mm/s
Cura: Speed > Z Hop Speed (I cant set anything above 4, but it doesn;t seem to by too important)