Search results: clear

Counting matching models…

Printables3DMakerNoob

Clearance Tolerance Test

Inpired by Maker's Muse's tollerance tests, this is a smaller version to test your printer clearance capabilities

Downloads: 76,106
Likes: 7,193
Rating: 4.95

Order a print of this model

Printables

Fallout Nuclear Waste prop

I printed it in PLA with 20% infill. I even made a lid with can hold a 12mm switch.

Order a print of this model

Printables

Sprinkler Extraction and Clearing Tools

My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…

Order a print of this model

Printables

Zero Clearance Insert for Hercules 10" Table Saw

Zero Clearance Insert for Harbor Freight Hercules 10" Table Saw This is a zero clearance insert for the Harbor Freight Hercules 10 inch table saw. You will need to cut the blade slot for the table saw first until the riving knife begins…

Order a print of this model

Printables

NFC tag, keychain (clear and phone logo)

Can be used for many things. From storing contact information, to the opening of doors. Just add en NFC tag and write an action to it (personally I use the app ‘NFC Tools’ to easilly do this). Print instructions: 0.2mm layer height pauze…

Order a print of this model

Printables

Do not Clean Clear Panels with IPA Magnetic Sign

For this print, an MMU (Multi-Material Unit) solution is required. Additionally, you will need three 5x10mm round magnets for the print. Slicing Instructions: In your slicer, add the file “Main_Body_5x10mm_Round_Magnets.stl.” Add…

Order a print of this model

Printables

Door Frame and Bolts with more clearance for easier installation

Door Frame and Bolts with more clearance for easier installation. In door frame i cut the slides a little bit and alt the bolts I made the space in the slides bigger.

Order a print of this model

Printables

Sawstop CTS 0 clearance plate

This is a replacement of the OEM throat plate for the Sawstop CTS. Basically copied the measurement of original saw, connected the split rear end of the OEM design, and made a easier to keep flat zero clearance plate. There are split…

Order a print of this model

Printables

Makita LS1220 mitre saw zero clearance throat plate insert

This remix of Clifton McMorris' (@CliftonMcMor_1416112) model has several key improvements: Solid kerf cut area in the middle of the print provides a clean and dense area for the sawblade to cut the initial kerf Increased height (scaled…

Order a print of this model

Printables

Bosch PCM 8S sliding mitre saw zero clearance inserts

Zero clearance inserts for Bosch PCM 8S sliding mitre saw. Inserts are intended to use only when saw is in vertical position, for other angles please use original inserts. For dimensions please see diagram, printer with table at least…

Order a print of this model

Printables

Central Machinery Band Saw Zero Clearance Insert

These are two zero clearance inserts for the Harbor Freight Central Machinery 9in Band Saw. I did have to lightly sand the edges for it to have a snug fit.

Order a print of this model

Printables

SV06 better fan clearance left Z block

Modified to remove the bottom corner edge to provide more clearance.

Order a print of this model

Printables

SV06+ Filament Runout Sensor and Bracket Max Clearance

Remix to move the sensor to a higher position on the printer. Added cable tunnel with Print Bridges that can be removed after printing with a sharp knife. (see pic) Added Trimmable Print Supports on bracket angle that can be removed after…

Order a print of this model

Printables

Hero Me Gen 7 Neptune 3 Pro Internal Support with Screw Clearance

Thanks MediaMan3D for the original design

Order a print of this model

Printables

Crash Derby - Nuclear Flydozer

Futuristic flying bulldozer powered by nuclear energy, designed for Crash Derby board game. Printed with 0.05 layer height. Painted with vallejo red ink 72.086 and glow in dark nail polish.

Order a print of this model

Printables

Axial SCX24 High Clearance Suspension Links - Gladiator/Power Wagon

Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…

Order a print of this model

Printables

Handle for the Chute clearing tool created by "kaje" as listed in the original source

I lost the original clearing tool for my snowblower and found the Chute Clearing Tool ver 2 by "kaje". It follows the same design concept and completes the set. The handle has a rough texture for better grip. I hope this is helpful to…

Order a print of this model

Printables

Clear Cover Snapdryer Dessican Basket

Clear Cover Snapdryer Dessican Basket Spare Part glue the seperate printed clips in place to prevent them from breaking (print orientation)

Order a print of this model

Printables

Axial SCX24 High Clearance Suspension Links - Deadbolt / Betty

I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…

Order a print of this model

Printables

Modeling Helper - Clearances, Chamfers, Fillets

A handy physical reference to have on your desk while modeling. All numbers in mm The lowest clearance slider might be permanently stuck. This is to be expected, as that low a clearance is generally too little for reliable movement.…

Order a print of this model

Printables

FumeClear FC-2001S Exhaust Port - Elegoo Centauri Carbon

This is an adapter so you can hook up the FumeClear FC-2001S to the exhaust of the Elegoo Centauri Carbon. The fume extractor can be found HERE If you do not like this option i have created a replacement top for the FC-2001S so it can…

Order a print of this model

Printables

FumeClear 3 inch hose adapter lid FC-2001S

2 Versions of this lid. The version with the fins only has them for the purpose of making the hose coupler stronger so it doesn't break as easy when using a hose clamp on it while keeping air resistance to a minimum. Best way to print is…

Order a print of this model

Printables

Prusa CORE One Snap-in Corner Block/Plug (Door Clearance remix)

The original corner block interfered with a fully opened door. Attached are files for standard core ones (hinge on the left side) and for those who have switch to right hinged.

Order a print of this model

Printables

UK Double socket desk clamp with 20mm extension on height for mains plug clearance

UK Double socket desk clamp with 20mm extension in height for clearing wires for mains plugs

Order a print of this model

Printables

Knurled screw knob (low clearance & filleted & short head) for Copanko Spool holder

I reaaly like the knurled screw desing from @Calmly and the remix by @D1ngsbums, but space is limited in my setup. This version has short head which is around 6mm shorter than the original version. It is not as easy to grab as the…

Order a print of this model

Printables

Nuclear Power Plant

This is a highly detailed nuclear power plant perfect for nuclear enthusiast!

Order a print of this model

Printables

Heart Clear-Ice-Mold Mold

This is a mold for use with food-safe silicone to make clear ice. This is NOT an ice mold, it's for MAKING an ice mold. PLA should NOT be used directly with food or anything you ingest! You can use this in connection with a standard…

Order a print of this model

Printables

Nuclear sign

just giving a warning of poop nearby or for decoration

Order a print of this model

Printables

Gaggiuino Gen 3 Screen Housing – Improved Water Clearance (Remix)

This is a remix of the original Gaggiuino Gen 3 screen housing by Loogle. All credit for the base model goes to the original creator. I made this version because the original housing sits very close to the water area on the Gaggia…

Order a print of this model

Printables

Gigaclear Cable Tidy

Two large wholes have been put into the model so a screwdriver can reach the screws on the inside

Order a print of this model

Printables

Voron Trident Panelmount with Clearance

Voron Trident Panel Mounts – Improved & Clicky Clack Door Optimized Remix This is a remix of the existing Voron Trident panel mounts with clearance , focused on improving usability, structure, and compatibility — especially when used…

Order a print of this model

Printables

Nuclear Symbol Insert

Remixed to use the nuclear symbol

Order a print of this model

Printables

Mark 8 Nuclear Bunker buster

from Wikipedia: "The Mark 8 nuclear bomb was an American nuclear bomb designed in the late 1940s and early 1950s, which was in service from 1952 to 1957. ... According to one government source, the Mark 8 could penetrate 22 feet (6.7 m)…

Order a print of this model

Printables

Blank Cassette Tape Shell Housing, Clear Body, Replacement Case - 3D Printable STL File

A unique 3D printable creation — this Blank Cassette Tape Shell Housing, Clear Body, Replacement Case For Damaged Tapes Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…

Order a print of this model

Printables

PIP Fidget Wanky Clearance test , quick 48 min print

# How To Use: The number Wanky's hiding is the current clearence level , make sure it hides the number completly # Info: ranging from change in rod diameter from max at base 0.8 mm (0.0314961 inch) to zero OR face offset of 0.4 mm…

Order a print of this model

Printables

French clear side hanger

A french cleat hanger/hook running parallel to the wall (which is 90 degrees from most hooks). I use it to hold a wide bag with strap on the middle. It will be obvious what I mean once you look at the photos. Designed for a 3/4-inch…

Order a print of this model

Printables

warning this 3d printer is nuclear powered_Extrusion

warning this 3d printer is nuclear powered_Extrusion 2/2/2 walls 100% infill 0.28layer Hight

Order a print of this model

Printables

Festool Kapex Zero Clearance Insert

Festool Zero Clearance Insert – Precision cuts with maximum safety! Print your own Festool Zero Clearance Insert for cleaner cuts, higher precision and maximum safety. Cleaner cuts: Minimizes tear-out and splintering for flawless edges…

Order a print of this model

Printables

BTT SFS 2.0 - 2020 Horizontal Feed, with Panel Clearance

Mounts a BTT SFS 2.0 on a vertical (or horizontal) 2020 rail, and still allows panel removal. The sensor feeds filament perpendicular to the mounting rail

Order a print of this model

Printables

Project Orion / Orion nuclear pulse rocket - 1:200

I thought Project Orion was pretty neat so I decided to model it. This variant was the smallest one studied and the most common one in concept art. It could have been lofted with a Saturn V first stage (S-IC). All parts should be…

Order a print of this model

Printables

CLEARmag

AR15 type magazine for safe dry firing practice.

Order a print of this model

Printables

Teeny Tote Lids with End Latch and Clear Top

The original https://www.printables.com/model/1484702-updated-lid-lowes-mini-box-teeny-tote-with-origina is awesome! But my friend wanted a clear top, and needed the lid to hold on more securely. Print with snug supports to support the…

Order a print of this model

Printables

PINLOCK piny PUSH PIN clear

náhradní špunt, pin na pinlock do plexy na helmu Tisknuto z ABS like UV resin Cleaner vrstva 0,05 mm

Order a print of this model

Printables

Minimalist Game Display Stand for NES with Dustbox Clear Protector Sleeve

For use with NES boxed games inside protective sleeves with approximately 129.5 x 27.5 mm footprint. Recommended Materials: DURAMIC 3D PLA Plus Printing: 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls No brim or supports necessary…

Order a print of this model

Printables

Oui Skadis Jar Mount - Adjusted Tab Clearance

Oui Skadis Jar Mount - Adjusted Tab Clearance Printed in PLA with organic supports everywhere (to support rim and tabs) First layer height .12 mm, Other layers .2mm

Order a print of this model

Printables

Pool Filter Cartridge Replacement for INTEX KRYSTAL CLEARN FILTER PUMP 602/220 – Polyester Fiber Mod

This model is a modification for pool filter systems (type 602/220) that replaces standard paper cartridges. It allows using polyester fiber (synthetic padding) or filter balls instead of disposable cartridges. Advantages: - Reusable…

Order a print of this model

Printables

Nuclear Boy

Nuclear boy - Something cute AI made

Order a print of this model

Printables

Bambu X1C / P1S / P1 Hotend Stealthburner Printhead Press Fit Only + Wire Clearance

This adapter does not need the difficult to install heat set inserts. It also removes material that can be used for cable clearance so I did away with the redundant mounting holes and added cable clearance and a pathway to snake the…

Order a print of this model

Printables

Clearcom Knob

Fits all Clearcom devices and is the same size/shape. will also fit any other standard 6mm post

Order a print of this model

Printables

LCR 4 Case - simple, large clearances, no supports

There are a large number of cases for the various versions of the LCR tester on this site already, but I couldn't find one that fit what I wanted. This version is a simple design, with rounded edges, which is screwed together, and can be…

Order a print of this model

Printables

Ender 3 S1 part cooling fan duct - for 5015 Fan - clear view of the 1st layer

Edit: I made a version for two 4020 fans. You can have a look here: https://www.printables.com/model/1118528-ender-sprite-extruder-air-duct-dual-4020-fan-ender With most cooling duct, the problem is that you cannot see the nozzles and…

Order a print of this model

Printables

Nuclear Launch Code - Money Gift

Enough space to fit a 10€ bill, if folded twice. Pause print to put the money inside, I put a piece of paper over the money to protect it from the hot filament.

Order a print of this model

Printables

Zero Clearance Insert for Carbatec Table Saw

There are two models here. V3 is slightly larger than V2 to account for a small amount of plastic shrinkage. V2 is the exact size. See it installed and tested here

Order a print of this model

Printables

Caution Honey Bee Stay Clear Sign (Warning)

Comes in two sizes, thick (5 mm) and thin (1.6mm). They consume about 80g and 25g of filament respectively. Obviously the thin version needs to be attached to something rigid. Scale the sign equally in X and Y to get the size you desire.

Order a print of this model

Printables

Bearing clearance test / massage tool

I wanted to test a different way how to put bearing in the design so I created this spinner and accidental massage tool. Bearing used: https://vi.aliexpress.com/item/32717527870.html Can be adjusted for other ones easily - Fusion 360 file…

Order a print of this model

Printables

Ender 3 V3 SE - Creality Light Bar S1 Extended with Clearance

Great original model. Printed a max height print and the extruder arm broke the clips. For Creality Light Bar S1 variant, I enabled full height of the Ender 3 V3 SE to clear the extruder arm lever. Follow install instructions from…

Order a print of this model

Printables

Zero Clearance Plate for Carftsman Table Saw

This print is for a zero clearance plate for a dado stack of up to 3/4". The plate itself was designed for my old craftsman table saw for 10" blades. The dado stack I use us smaller at 7 and ¼" I believe or 8". It is split into 2 parts…

Order a print of this model

Printables

Sterilite 15qt ClearView replacement latch

Replacement latch, needed because some of the ones we'd bought were missing a latch. Printed at 0.2mm, 40% infill on its side with support material. Do not print long-ways unless you are printing in a material that you can refuse, as the…

Order a print of this model

Printables

Mini Satsana Remix - Ender 3 V2 w/BL/CR Touch Mount and Creality Linear Clearance

Upgraded my Ender 3 V2 that had a mini Satsana on it, but needed clearance for the Creality Linear X kit. I just clearanced the area I had to end up drilling out for the first one to fit. This one fits nice and snug. Print it in PETG.

Order a print of this model

Printables

structured vase "nuclear cone"

a "remix" I did of my structured vase REMEMBER TO LIKE IT if you share, collect or make it :-D Category: Decor

Order a print of this model

Printables

Sterndichtung bestway flowclear 2006l/h

Als Ersatz für eine kaputte Sterndichtung bei einer Bestway Flowclear 2006l/h. Eventuell auch bei anderen passend. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 90 Filament: any TPU…

Order a print of this model

Printables

Metabo KGS216M Zero clearance insert

My KGS216M is an older version with different shape than the current version.

Order a print of this model

Printables

Thomas the Thermonuclear Train

Boom Boom

Order a print of this model

Printables

Low-clearance Skadis mount for nightstands

Backstory I wanted to have some things easily grabbably reachable while in bed, e.g. bluetooth keyboard for watching movies from bed. So I decided to attach a Skadis to the side of my nightstand. Model This mount attaches into the right…

Order a print of this model

Printables

Regalux Clearbox Filament Drybox including MMU3 Buffer Solution

A simple filament dry box to store and use up to 5 filament spools and lead directly to the MMU on the printer. The advantage is, that the original prusa MMU Buffer can be replaced due to the buffer wheel solution in the box. Built from a…

Order a print of this model

Printables

LED Clearance Light Corner Mount- Toolbox Lighting

Designed these to mount the cheap 3/4" white LED truck clearance marker lights in the corner of truck toolboxes for night area lighting. Amazon.com: Nilight 10 PCS 3/4 Inch Round LED Clearance Light LED Front Rear Side Marker Indicator…

Order a print of this model

Printables

Crosswind Mini 1600 Servo Trays for 17G Sized Servos - Updated for better linkage clearance

I had some ProModeler DS100DLHV micro servos laying around and wanted to use them in my Mini Crosswind. The servo trays are slightly bigger than the original so you will need to trim some foam to use them. They're 1mm wider and 5mm longer…

Order a print of this model

Printables

Better Screw Install Clearance Dyson Accessory Wall Bracket 3 tools

A remix of the Dyson Accessory Wall Bracket for 3-tools. I had issues with installing my screws in the original design, and I thought the screw size that fit was a bit too small. Most consumer install kits come with #8 screws, so I…

Order a print of this model

Printables

Clearance Ring W/ Gauge Peg

This ring has 9 different clearances on it, each starting at 20mm diameter in the center and moving up .2mm with each clockwise circle. The Peg is 20mm in diameter and 30 in height so you can also use it as a gauge tool of you're printer…

Order a print of this model

Printables

Extra clearanced Open Belt mod

I have opened up the back of the belt path between the belt and the extrusion for extra clearance after experiencing slight belt rub on the stock clearance.

Order a print of this model

Printables

Klipper Expander Thermistor clearance

Klipper Expander Cover with clearance for the Thermistor terminations as to prevent pinching the connectors when in closed. this print is really dependent on tollerances so can recemend you slightly scale down the model as i have found it…

Order a print of this model

Printables

Garmin Varia Quarter Turn Rack Mount Remix with more clearance

The original model worked perfectly for me as far as affixing the radar to the printed model is concerned (with a satisfying “click” once in place), but it caused the Garmin Varia RTL515 to collide with the fender on my bicycle/rack…

Order a print of this model

Printables

Craftsman Zero Clearance Insert

I designed an insert for my older model Craftsman table saw using the SCAD model by GmEyedDvi and split it in Fusion360 so I could print it on my 10" printer bed. I moved the magnet mounting holes to correspond to the wider ledge on my…

Order a print of this model

Printables

Impossible Passthrough - Nuclear cooling tower w/ radiactive logo

I tried my hand at impossible passthrouh puzzles with this cooler tower looking quite like those at work. 0.3 mm clearance between the two parts, 0.2 was too tight enough on my first test, 0.5 was too loose. If needed, I added the STEP…

Order a print of this model

Printables

Nuclear plant cooling tower (passthrough)

It's a two pieces nuclear plant cooling tower. Top and bottom look like nuclear warning signs Made with the courtesy of Hegemonie :-)

Order a print of this model

Printables

AEG Mitre Saw Zero Clearance Throat Plate Insert

Throat Plate Insert I made for the "AEG 10" Dual Bevel Slide Compound Miter Saw (Model PS254DB) The insert is split into two identical pieces to fit most print beds. Together, they form a perfect replacement for the stock throat plate,…

Order a print of this model

Printables

DW774 zero clearence insert

A zero clearence insert for a Dewalt DWS774 mitre saw. I fitted this to the mitre saw and use the spinning blade to cut the slot into the insert.

Order a print of this model

Printables

Headphone band replacement for Back Bay ClearCall70 headphones

My headphone band broke and rather than buying new headphones or wrapping the band with tape, I decided to challenge myself and replicate the band using Fusion 360. The best quality I've gotten with a 0.4mm nozzle is with: 100% infill…

Order a print of this model

Printables

Nuclear Power Plant Cooling Tower Pencil Holder

Wanted a pencil holder that spoke to me and wanted the practice with F360. I got inspiration for the nucleus on the side from The Simpsons. Simple print. Should've made the seams on the back. I printed it with no infill, no top layer, and…

Order a print of this model

Printables

Shopping Coin Clear

Shopping coins in the shopping basket + coin holder separately. You can add anything, name, title, image, shapes, etc.

Order a print of this model

Printables

ClearCore Cover with JTAG Debugger Access

The Teknic ClearCore motion controller has a JTAG debug port on the PCB, but it isn't accessible without removing the cover. This replacement cover has an opening for the debugging cable to attach without leaving the entire board exposed.…

Order a print of this model

Printables

Nuclear Night Light

A Glow-In-The-Dark Night Light. Full details on Instructables | http://www.instructables.com/id/Glow-In-The-Dark-Nuclear-Bomb-Night-Light Love 3D printing? Love T-Shirts? Then you need to check out steps-per-mm.xyz ! It is loaded with a…

Order a print of this model

Printables

radiomaster boxer folding antenna more clearance

The original has a width of 11mm, I expanded it to 15mm because my antenna has a larger middle.

Order a print of this model

Printables

Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3

Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate. Easy assembly: Designed to fit a standard 220x220mm print bed in two pieces for efficient printing. Hardware Compatibility:…

Order a print of this model

Printables

Enhanced Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3 with Improved Dust Collection

Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate, now featuring enhanced dust collection . Improved Dust Extraction: Additional air holes strategically placed throughout the…

Order a print of this model

Printables

Fallout Nuclear Waste prop

I printed it in PLA with 20% infill. I even made a lid with can hold a 12mm switch.

Order a print of this model

Printables

Embout clearomiseur Zeus - Drip tip Zeus

Qui n'a pas déjà perdu ce petit embout sur sa vapoteuse ? Ce modèle est destiné au clearomiseur Zeus et s'adapte parfaitement comme l'original. Vous ne serez maintenant jamais plus en panne à cause de ce petit accessoire ^^

Order a print of this model

Printables

CLEARANCE TEST

use your current/most used print settings to see what clearance you need cylinder Z shows what clearance you need for a part printed on the Z axis cube Y shows what clearance you need for a part printed on the Y axis cube X shows what…

Order a print of this model

Printables

Pop-up Gift Card Box - Larger Clearance

Alternate latches for the Pop-up Gift Card Box with larger filament holes. The original latch files have 2.2mm holes and are made to be a tight fit with 1.75mm filament. These latches have 2.6mm holes, which will more easily accept 1.75mm…

Order a print of this model

Printables

Hammer K3/B3/C3 Zero Clearence Tischeinlage

Die Druckteile sind leicht herzustellen, die Auswahl des Materials ist egal. Schichthöhe 0,2 mm Perimeter 5 Stützen nur auf dem Druckbett Fülldichte 30% Füllmuster Gyroid Beide Teile müssen zusammen gesteckt und auf einer ebenen Fläche…

Order a print of this model

Printables

Nuclear Power Plant

Nuclear Power Plant Angra 2 Brazil Style Usina Nuclear Estilo Angra 2 do Brasil

Order a print of this model

Printables

2020 extrusion Reverse Bowden Mount with linear rail clearance

Reverse bowden mount

Order a print of this model

Printables

LEGALIZE NUCLEAR BOMBS sign (8x8 inch)

yes the link works btw, I tested (the model shown has a modified size so that it wouldn't fail) for the multicolor on single extruders: | layer | Yellow: 1-10 Black pause at: 11 White pause at: 18 (layer will vary with size this was made…

Order a print of this model

Printables

nuclear bomb (Tsar Bomba)

You can print the world's most powerful nuclear bomb yet for no reason. Just don't do anything bad with it, ok?

Order a print of this model

Printables

Clear Aligner Removal Tool

This aligner removal tool is designed with simplicity and durability in mind, perfect for daily use with all popular brands like Invisalign™, Spark™, and more. Featuring a smooth, no-sharp-edges design, it ensures a comfortable experience…

Order a print of this model

Printables

Nuclear ICBM Delivery system

ICBM System based on the russian Satan missile. Printed on Elegoo neptune 4 Color change in orca slicher Just a little glue to assemble.

Order a print of this model

Printables

Kidde KeySafe - Replacement "clear" button

Useless people tried to break into our Kidde Keysafe lockbox but only succeeded in breaking off the “clear” button. This is a replacement button and shaft. This button is larger than the original (I didn't have the original to reference…

Order a print of this model

Printables

Tire fit/clearance gauge for 559/584/622 ( 26"/650b/700c)

Whether you're contemplating a change of wheel size, or just want to know the maximum tire size that will fit in your frame or fork with your current wheelset, this tool will remove the guess work.* Based on the idea of the checker…

Order a print of this model

Printables

Alternative top mounting parts for better clearance

Mounting parts modified to no protrude towards the front of the frame in order to no interfere with the printhead

Order a print of this model

Printables

Scheppach HBS 32 vario zero clearance insertion

English The HBS 32 vario band saw from Scheppach has a round plastic table insert. This naturally wears out during normal operation. Fortunately, some spare parts are still available for this old machine from the early 1990s. Parts such…

Order a print of this model