1 / 2
Print Glass With Your Bambu X1/X1E/P1S/P1P Printer:   Orca / Bambu Slicer + Overture Clear PETG formula — image 1
1 / 2

Print Glass With Your Bambu X1/X1E/P1S/P1P Printer: Orca / Bambu Slicer + Overture Clear PETG formula

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A tuned set of process and filament profiles for Bambu Printers to print "glass"

Rating
5 / 5
Likes
296
Downloads
2,654
Makes
11
Views
10,116
Reviews
7

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Share Alike

Do you want to print as clear as you can on your printer?  

This tuned set of profiles for BambuSlicer/OrcaSlicer should help you print with clear as i've been able to tune on my X1C.   I've tried several different parameters and come up with the best settings I can.  If you are curious, this is option #8 in the test samples I have in the photos.

I took many of my lessons in glass tuning here from prior art and those examples are linked as remixes here.

This process and filament profile is tuned for Overture Clear PETG, reported to be one of the best for this purpose.

Tips

  • Printing “glass” means patience.  Hot and slow is key here for good results.  
  • You can try to increase the print speed and layer height from the starting point here.. but your results may get worse (mine did).  
  • Close your chamber door and top as well.  My ambient chamber temps were 30-39 deg. C  or so during most of the print.
  • Since this is very slow, the nozzle type likely doesn't matter here and this should work decently well for X1/P1S/X1E.  It may also work fine on an unenclosed P1P, but ideally you want the environment warm to slow down any annealing.

Tags