Ridgid R4512 Table saw zero clearance throat plate (R4520?)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe…
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 359
- Makes
- 0
- Views
- 1,895
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a zero clearance throat plate for Ridgid R4512 table saws.
These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify.
Because the print is too large for most printers, it must be printed in 2 parts and glued together using the included dove tails. Print 2 of the smaller dove tails.
It's likely a good idea to print with supports for the part that overhangs.
At least 60% infill is recommended because you want this to have some weight to it.
See notes about what to do when done.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
60
Post-Printing
Since this is too large for most printers, gluing the two pieces together has to be done.
The included dove tails should be a very exact fit and fixed in place with super glue. Be sure to keep the top as level as possible.
Glue a thin washer down to the front and enlarge the two screw holes to fit screws. Adjust those screws to get a snug fit.
Category: Parts