PTS200 threaded connector for T12 sleeve (right-threaded on both ends)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connector piece that connects the PTS200 soldering iron to its T12 sleeve (right-threaded)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I bought this PTS200 soldering iron from aliexpress which supports TS100-styled bits and T12 bits via different sleeves. The threaded connector (shared between both TS and T12 configurations), is left-threaded on the sided that fits onto the sleeve (matching the TS sleeve). However, my T12 sleeve was right-threaded (probably a mismatched set from a different version). The seller has thus far been unhelpful and I don't want to deal with the hassle of sending it back so I'm about to settle for a partial refund.
This model is a replacement threaded connector piece that connects a right-threaded T12 sleeve onto the main body of the PTS200 soldering iron (also right-threaded).
You can probably get it printed in metal or machine it yourself for best results, but it'll also work if printed in PETG or ABS, just that it might eventually get hot enough to warp on a long soldering job. For short jobs or if you have your sleep settings just right, it seems like the heat doesn't travel far enough up the T12 bit to melt/warp this piece.
The OpenSCAD file uses MCAD's dev branch