Liczymy pasujące modele…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
Theses are threaded insert tolerance test for finding the hole size for your designs. Includes horizontal and vertical holes test for each size. Hole size is based in CNC kitchen sizing recommendations and the numbers indicate the…
Inspired by the kickstarter project, but I didn't want to pay for it, so I designed one myself Printer: PRUSA MK4S Layer 0.25 Structural Infill 15% Printed with PETG
Funnel with threaded sleeve for jug Made to fit jugs with 40mm (inner) to 44mm (outer) threads 4mm thread pitch Printing Print top down with brim some brim as the cantact area is low. No supports should be necessary. Example funnel…
I modified the “No fan, no bottom hex” version (only that one) to increase the diameter of the screw holes to 3.5mm and add space for threaded inserts (M3x5x4) in the bottom of the model. Print bottom down with supports (for the overhang…
Silicone/Caulk Threaded Nozzle Cap for unthreaded nozzles
Speaker Interface for 1/4"-20 threaded mount holes, such as found on the Polk Audio RM6761 satellite speakers. Note that in my case, the speakers were quite heavy for the original articulating mount design and are weighed down so they…
Remixed of the original M6 connector , allowing to connect 2 PTFE tubes using M6 quick release connectors. Both sides are threaded.
This box was made for calibers, as well as for dies and similar items Don't forget to scale the model to your needs in the slicer, and don't forget about tolerances :)
Credit for the teleprompter goes to KatzCreates: https://www.printables.com/model/90999-camera-lens-mounted-teleprompter
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
Hello everyone, I am glad to present a random test model, which is also a tip for a bolt/stud M8. With this model I check the acceleration and speed of my printing, as well as the fracture strength by inserting a stud into the hole. Good…
I have come up with a new way to firmly secure MFT accessories to your workbench. Since many people have tables with different sized dog holes, I have made a range of differently sized Push Dogs. Just find the size that works best for…
A simple end cap with a threaded male end to go with another female open connector to attach and close a 4in (can easily be scaled up or down) PVC pipe. edit: Have added the stl file as well per request.
No supports needed. I have opted to use a Diamond-style 3D effect plate with a Hilbert-curve for first layer for extra fanciness. There are 4 “styles” to choose in 3 “sizes” Styles Knobs (one insert, relatively narrow) Pull (two inserts,…
📦 Description This is a 2-part printable set consisting of: 🧩 Hex spacer (nut) with internal thread 🔩 Flat-head screw with external M6-style thread → Both fit together smoothly and can be printed without supports on most FDM printers. Use…
📦 Description This is a 60 mm tall printable spacer with internal threading, compatible with standard M6 bolts or screws. Great for: Mounting electronics Spacing plates or panels Prototyping mechanical setups Swapping in for metal spacers…
Here's the onshape link, pretty much every part should be adjustable through the variable table.…
What is galling? galling noun : a type of wear caused by friction between metal surfaces, often leading to parts sticking or seizing. Example: "Galling can lead to a nut and bolt binding under high pressure." adjective : extremely…
this will fit on presta valves that have a threaded shaft it doesn't twist on to the upper most part pf s presta valve.
This is a storage box for printer nozzles, based on the design with magnetic lid. I however wanted more secure locking so I added a threaded lid. It also means that no magnets are needed. The lid's basic shape and thread geometry were…
I printed a GFCI box but the pin used had nothing to hold it in place. I took the M6 bolt model and added a shaft and rounded the head off. Total length is 63 mm
I lost the bulkhead for my flex and couldn't find one. Save yourself 10$ and just print this one. I used this nozzle with it. Enjoy. https://www.printables.com/model/819851-fluval-flex-15g-low-flow-spray-bar Supports aren't necessary,…
I designed this model considering easy use of multimaterial painting, in case you want to print the logo and text in a contrasting color to the case. Printed in PETG with 0,25mm nozzle (recommended for clear and sharp contour of the logo…
you need custom length M3 threaded rod to make a rod and put this to its ends, get 3D sets ball joints in it
This is a vented threaded oil funnel for Toyota threads (37x3). I have designed a funnel, a cap, a regular funnel style attachment. I can confirm it works with the 2020 Toyota Tundra. I have made this out of PETG and ABS. Updated Model -…
Estensione della vite, lo utilizzo per rendere più resistente l'idroponica usando il vaso sortera per infilarlo dentro il sostegno https://www.printables.com/model/1478576-stutzrohr-hydrotower-sortera-60l Il sostegno di cui sopra dovrà…
Threaded oil funnel for HONDA modeled from D14 engine but probably work good on another models.
This tube and thread should work on most tables with a 2" thick tabletop. (My lack is the 35 3/8" x 21 5/8" coffee table variant, number 904.499.05 .) Drill hole with a 5/16" bit or similar. Works with 1.75mm filament. Print upright, with…
What it is Threaded BSP (G / BSPP) adapter: G 3/4" female → G 1/2" female , with hex body for easy tightening. Threads Standard: ISO/BSP pipes (BSPP / G) Modeled thread (not just cosmetic) Print (tested) Material: PETG Nozzle: 0.4 mm…
I like the looks of the Bee Hive Lamp Shade, but the top part did not fit onto my standard North American threaded socket. I found the Lamp Shade Retention Nut Replacement model, printed that to confirm it fit my socket, then merged the…
This is an adapter to fit a desk lamp and attach a threaded moon globe.
I didn't like others designs where the tape stay looking downward so I made this. Used a thread for a strong and ready to use connection.
I made this because I found others to be too bulky for no reason. Used a thread for a strong and ready to use connection. The hook holding the plug is this https://than.gs/m/974106
Update: Created V2 that supports smaller diameter spool openings. I found that I was getting some that slightly smaller then 53mm and were just too tight to fit. I split the shaft into 2 pieces to all me to adjust the diameter easier.…
I've only had a few PC04-M10 connectors laying around. So I decided to use them for this drybox project. Works fine, so if you need one, feel free to use.
This Italian Puff isn’t just a replica: it has a hidden threaded compartment for discreet storage.
Print it with the best resolution setting your printer has, use appropriate filament. Works best if you can finish it by cutting with a 3/8 16 tpi NC thread cutter.
I printed this case and struggled to keep the front bottom panel on with magnets alone. I didn't have right-angle SATA power connectors, so the cables stuck out a bit, pushing the panel stronger than the magnets could hold it. These…
This is a Frankenstein remix of two models to quickly create a functional locking OpenGrid insert that can take 1/2 Inch 20 TPI as used by Loc-Line, or rather the Chinesium knock offs of the 1/4" inch piping. That line was originally…
This is a remix of the Octopus Pro Mount for DIN Rail Bracket & Fan Mount. I made the fanholes 4mm wide and the body 6mm thick so I could use my M3 Ruthex threaded inserts. The fans I've mounted on the top so I could use M3x40mm screws. I…
This oversized screw model is a clean and satisfying print that combines functional threading with a bold decorative look. Perfect as a desk prop, tolerance test, conversation piece, or even as a playful mechanical display element. The…
A 1/2-inch threaded dust cap designed to seal and protect the exposed end of a BSP pipe fitting. The cap prevents dirt, moisture, and debris from entering the connection and is suitable for general plumbing and water‑system applications.…
I made this for something like 10 years ago and threw it up on Thingiverse and Cults3D to see if anyone could use it. For some reason it has been downloaded a total of 6000+ times. So hey, it seems popular. Created with Customizer!…
I created this representation of a Threaded Insert for use in one of my designs. Dimensions taken from the original brass insert and are approximately 5mm major diameter, 4.8mm length with an M3 thread. For use in your designs, not…
This compact muzzle brake for the G26 Fidget Keychain is based on realistic firearm components and design principles. It features a streamlined profile with three beveled slots, providing a detailed tactical look proportional to the G26…
I created this representation of a Threaded Insert for use in one of my designs. Dimensions taken from the original brass insert and are approximately 5mm major diameter, 4mm length with an M3 thread. For use in your designs, not suitable…
Easy-Print Airsoft Suppressor with M14x1 CCW thread This airsoft suppressor is designed for easy 3D printing and features an M14x1 left-hand thread (14mm CCW) for compatibility with many airsoft guns. It consists of three main parts:…
Basically designed this to hang from a beam clamp via threaded rod. I am uploaded three versions, one with threaded inserts for the plate itself, one that just relies on the whiz nuts included with the AP (same design as Mauricio's) and…
I created this representation of a Threaded Insert for use in one of my designs. Dimensions taken from the original brass insert and are approximately 5mm major diameter, 5.7mm length with an M3 thread. For use in your designs, not…
Had a few meters of 35 to 36mm vacuum hose that has parrallel ribs. Designed a fitting that allows me to use with my kacher vacumm and Triton dust bucket.
A quick remix to swap the wood screws for M3 screws and Threaded Inserts, otherwise exactly the same. Requires: 4x M3 8mm threaded inserts 2x M3x14mm bolts (for the shallow bit) 2x M3x16mm bolts (for the high bit) You still need the lock,…
I created this representation of a Threaded Insert for use in one of my designs. Dimensions taken from the original brass insert and are 6.3mm major diameter, 5.8mm length with an M4 thread. For use in your designs, not suitable for…
I made this do then I can dominate the field with a lousy gun. The shots sound scary while shooting and it works. This is a 14mm ccw threaded amplifier designed for only 14mm ccw threads. This works and is perfect. Print this as 101% (one…
To get the polymaker drybox shelf to work, I swapped out the stock spool holder for tonyPA. Works great for spools I don't have in boxes. But I have a couple 2KG spools, and so I ended up making this remix. Print just the big piece if you…
This model is a stabilizing end cap designed for diy filament dryers that use a threaded rod as a spool holder. The part holds a bearing inside the body, which helps the filament spool rotate smoothly while keeping it centered on the rod.…
dapter for the dual-spoke steering wheel from the Škoda Felicia , converting the original spline hub into a mount for an M10 threaded rod . Fits into the original ~25 mm spline hub of the wheel and creates a through-hole for an M10…
Dimensions taken from the original brass insert and are approximately 7mm major diameter, 9.5mm length with an M5 thread. For use in your designs, not suitable for printing. Other sizes: M2.5 x 5.7 x 4.6 -…
Dimensions taken from the original brass insert and are approximately 8.7mm major diameter, 12.7mm length with an M6 thread. For use in your designs, not suitable for printing. Other sizes: M2.5 x 5.7 x 4.6 -…
Dimensions taken from the original brass insert and are approximately 8.7mm major diameter, 12.7mm length with an 1/4" - 20 UNC thread. For use in your designs, not suitable for printing. Other sizes: M2.5 x 5.7 x 4.6 -…
INFO I needed right angled funnel for my lawn mower, but i didnt have one. So i make universal funnel with threaded adapters. I made 4 adapters more about that in adapter section. Specifications Threads: Type: ISO Metric, Size: 24 mm,…
Most weeding tool holders rely on simple friction fits that wear out quickly or never hold the tool securely in the first place. This design takes a different approach by using a mechanical clamping system to apply real, adjustable…
If you're here it's because you've sheared your center cap in half from overtorquing it. Because same. This replacement part can be clipped into the aluminium section, and then i'd recommend using a soldering iron to melt the plastic down…
Organises threaded heat insert tips by the different sizes with the text description next to them. Uses 6 M4x6mm heat inserts. NB: This is based on my heat insert tool and how it fits to my iron (it's one of the cheap kits from…
So I felt that I need to have a giant lollipop prop, but didn't want to use glue. So I modified the parts with threads and assembly is straightforward. OpenSCAD source here:…
I really liked the original design but wanted to connect my containers together with their respective caps. So here's a remix of the original cap with threads on top. Enjoy!
This is a reusable coffee pod prototype designed as a sustainable alternative to single-use capsules. It enables repeated use while maintaining the convenience of capsule-based coffee systems. The prototype features a threaded lid…
Well the shorter one always broken, No idea why. So I make the Longer one.
In theory the cap should protect the connector from dust and moisture but I have not as yet added features for an O ring or otherwise to seal the water out. I used some dielectric grease to help with water protection for now. Printed with…
Threaded connector for pumps for aquariums, fish tanks, ponds, and fountains. Connector with M20 thread and 15mm outlet diameter. Check out my other models. Przyłącze z gwintem do pompy do Akwariów, Zbiorników Rybnych, Stawów i Fontann.…
Just another threaded bottle. Solid and Functional not support needed. I used PLA for the print.
This model just prints a 3 inch screw and a hole for it to go in. this can be used to see how accurate your printer can work.
Parametric Brass Threaded Heat-Set Insert Library (M2–M6, 18 Sizes) A fully parametric brass heat-set insert library for Shapr3D covering 18 common ISO metric sizes from M2 to M6. Intended use: This is a CAD/design-time library. When…
14mm ccw threads for most tracers and suppressors print orientation as it is in the last slide (adapter 45 degrees for strength) I printed it in the Prusa .20 structural setting
Dimensions taken from the original brass insert and are approximately 7mm major diameter, 5.8mm length with an M5 thread. For use in your designs, not suitable for printing. Other sizes: M2.5 x 5.7 x 4.6 -…
Just needed one so I made it. Used a thread for a strong and ready to use connection.
Another one I needed Used a thread for a strong and ready to use connection.
This model adds an additional adapter port, which allows you to size the female threaded end and size the opposite end to fit into or over another vacuum port. In my case, I needed the port to fit into a slightly larger port, which also…
I put some threads in the base for a quarter twenty screw
A small cylindrical box with a threaded cap. Outer diameter 45mm and height 45mm. This box can be printed without supports. I printed it in PLA with 0.2mm Layer height and modifier on the knurl part of the bottom object with 0.1mm Layer…
Print with PETG and 0.1 mm layer height for best threads, but PLA and 0.2 mm layer height also works.
This model is a practical and versatile screw-top container designed for everyday use. It features a cylindrical body with a threaded neck and a matching screw-on lid, ensuring secure closure and easy access to the contents. Use Cases:…
Custom Logo Threaded Containers – 3D Printed Business Branding Pots This listing showcases custom threaded storage containers designed for businesses and creators who want to add their own logo or branding onto the lid. Perfect for…
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
This part complements the one created by DAL: http://www.thingiverse.com/thing:1260449 The friction zone becomes continuous, shocks and noise are reduced. Printed on a Dagoma Discovery 200: 0.2mm layers Print Settings Printer: Dagoma…
Holes added on the bottom for M4x8 threaded inserts
A handy case to hold your threaded inserts and installation tools. It's designed to fit the tools sold by CNC Kitchen and the labels match the sizes they sell. I printed in white and black ABS and it came out really nice. You'll need 6x…
As I was building my SLAB, I interpreted (incorrectly) ‘thread lock’ as ‘super glue’. Now, alas, I've got my threaded rod superglued into my RodCap, meaning it's not quite long enough to fully depress the trigger lever. The smart move, of…
Remixed the barrel to have a 14mm counter-clockwise thread for muzzle attachments.
The complete set of #Stemfie3D cap nuts. STEMFIE news 👉 X.com/stemfie3d
Fairing Threaded Standoffs / Spacer - Transalp 650 M10 Thread Mod. 14-42mm - Boccola Perno Carena Transalp 650 Mod. 14-42mm Filetto M10 M10x14mm M10x42mm Suitable for:…
A shallow tray to store your CNC Kitchen threaded insert soldering tips (V1). A user reported that the new version, which includes a new M2.5 tip, does not fit . Remixes welcome! The adapter can easily be removed by pressing down on one…
Features: M3 threaded Inserts (ADXL spacing 15mm) Improved the heatbreak duct curvature for better airflow. Improved heat-break fan fitment + fan alignment (new). Improved LED PCB clearance/fitment Reinforced mounting lugs Hex Key access…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame There is no pictogram for threaded inserts as far as I know of, so I came up with this design. Print it…
Initially, I drew a durable and convenient glasses case, but it can be used as a container for small items. Internal case dimensions: diameter 33 mm and length 155 mm. First change I added another version of the body half, making it a…
There are quite a few parametric containers on here, but most of them are done in Fusion and I wanted to make one in OpenSCAD. It pretty much relies on the Belfry OpenSCAD library , so you'll need to install it in order to render new…
