1 / 5
Filament Dryer Spool stabilizer with Bearing (threaded rod mount) — zdjęcie 1
1 / 5

Filament Dryer Spool stabilizer with Bearing (threaded rod mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

End cap stabilizer for homemade filament dryer using threaded rod. SUNLU V3 spool

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — NoDerivatives

This model is a stabilizing end cap designed for diy filament dryers that use a threaded rod as a spool holder.

The part holds a bearing inside the body, which helps the filament spool rotate smoothly while keeping it centered on the rod. This reduces friction and improves spool stability during drying.

FOR SUNLU V3 spool (55mm)

Features:

• Simple and fast print

• No supports required

• Smooth spool rotation thanks to integrated bearing

• Helps keep the spool aligned during drying

Printing recommendations:

• Layer height: 0.2 mm

• Infill: 15%

• Material: PLA or PETG

• No supports needed

Assembly:

NEED:
-Bearing 608
-Threaded rod M8 

Insert the bearing into the center hole and mount the part onto the threaded rod together with your filament spool.

If you are using multiple spools inside a larger drying box, the stabilizer can be secured in place with a nut on the threaded rod. This helps keep the position fixed and prevents the spools from shifting during use.

Tagi