Shop Vac Hose Threaded Adapter with Port Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vacuum hose user defined threads and port adapter to fit any thread style shop vacuum hose and port.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model adds an additional adapter port, which allows you to size the female threaded end and size the opposite end to fit into or over another vacuum port. In my case, I needed the port to fit into a slightly larger port, which also accepting a threaded style hose. Since no two vacuum ports, or other fittings are sized the same, this gives you the option to make a hose adapter that fits your needs.
The ready to print model provided is for a RIDGID 1 7/8" Professional Hose.
See Parameters screenshot for settings, and the attached drawing for where the settings are used. The transition chamfer uses the WallThickness parameter.
Diameter1 and Diameter2 are adjustable to set needed diameter of your port, and to regulate the taper angle. I recommend a slight taper for a good tight fit. Measure your port with calipers, and size the diameters at least .5mm over and under that size.
I Have printed it without Brims on a BIQU CryoGrip Glacier and no issues with PETG. Brims are defined in the Bambu print file, but can be removed if not wanted.
Supports are added for the internal hose Stop Ring.
Printed with the following settings (my preferred settings, adapt to your own preferences):
Layers: 0.20mm
Walls: 4
20% Locked Zag Infill
Inner and Outer Brims, 5mm
Text Layer can be edited or removed in the Fusion 360 File.