Caulking Glue Tube Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Calking glue rack for storing tubes of silicone and similar form factor items
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 835
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
This rack can be used horizontallaly or vertically. you can also print multiple and stack them.
This rack is made to fit a 210x250 bed perfectly.
I used this pipe from bunnings and cut it into 11x 150mm lengths, you can make it longer if you like but i wouldnt recommend cutting the pipe any shorter. The min max dimensions of the pressure pipe are:
ID Min: 52.5mm Max: 53.5mm
OD Min:60.3mm Max: 61.1mm
I would start by printing the base and gluing the pipe sections in.
I printed in PETG and used common PVC pipe glue as this works really well on PETG.
You may not need to glue the pipes in, I'm not sure how necessary this step is.
Once pipes are fitted to base fit the front on. you may need to gently use a mallet and move each pipe around a bit to get them all to line up with the front. I have inporved the design a bit as I broke my front cap from hitting it too hard, now the front is drafted slightly to allow the pipes easier fitment.