Minimal colorization jig for PET strips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very minimal jig for sliding a cut PET bottle strip through to colorize it before turning it into filament…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a very minimal jig for sliding a cut PET bottle strip through to colorize it before turning it into filament with a pultrusion machine. Just hold a wide-tip permanent marker against the strip through the window and pull. The opening is designed to admit strips that curl from cutting the bottom or top segment of a bottle.
The jig prints without supports in a 45° orientation as in the STL file. Provided STL allows strips up to 10mm wide and 0.7 mm thick. If you need a wider opening or a more constraining path for narrower strips, the customizer/OpenSCAD source file can be used to produce variants.
Usage demo video: https://youtube.com/shorts/rYKTfnku9vg
Category: 3D Printer Accessories