Minimal colorization jig for PET strips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a very minimal jig for sliding a cut PET bottle strip through to colorize it before turning it into filament…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a very minimal jig for sliding a cut PET bottle strip through to colorize it before turning it into filament with a pultrusion machine. Just hold a wide-tip permanent marker against the strip through the window and pull. The opening is designed to admit strips that curl from cutting the bottom or top segment of a bottle.
The jig prints without supports in a 45° orientation as in the STL file. Provided STL allows strips up to 10mm wide and 0.7 mm thick. If you need a wider opening or a more constraining path for narrower strips, the customizer/OpenSCAD source file can be used to produce variants.
Usage demo video: https://youtube.com/shorts/rYKTfnku9vg
Category: 3D Printer Accessories