American Standard Champion compatible toilet wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement wrench for the large nut holding an American Standard Champion toilet valve to the upper tank
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
When I bought my house, it had American Standard Champion toilets. They flush great. I was happy.
But shortly after moving in, one of them began to leak. You know the drill: Water bill is higher than usual. At night, you can hear the toilet refill for a few seconds. Silence…silence…swish!…silence.
As it happens, these things aren't compatible with your standard big store “Universal Flush Valve replacement” you can buy for a few bucks. The replacement is the entire valve for $30. I wanted to just replace/buy a gasket to solve the problem. But no dice. This thing has a huge non-standard nut. And the only way to get the wrench is to buy that $30 valve kit.
So, after springing for the dough, I fixed my toilet. Then, in a fit of pique, I decided to replicate their wrench and put it on all of the maker sites, so the next time someone just wants the wrench to replace a 25 cent gasket, they can.
My version doesn't flex as much under load as their version. I imagine it'll hold up nicely. And it fits like a glove.

Have calipers, will travel. :D
Suggested print settings:
- Filament: PetG
- Perimeters: 4
- Infill: Gyroid, 20%
Everything prints flat to the bed, without supports or any other special settings.