Enclosure for FlightRadar24 Raspberry Pi Basestation and accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a case for a Raspberry Pi 3 Model B+ which I was planning on using to create a Flightradar24 tracking…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 373
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed a case for a Raspberry Pi 3 Model B+ which I was planning on using to create a Flightradar24 tracking station. The Pi required an RTL-SDR dongle and a Flightaware 1090MHz ADS-B filter to also be connected so I decided to try and adapt an existing case to include an accessory bay where these additional components could be mounted.
As the Pi was going to be working 24/7 and was getting quite warm, I decided to also fit it with a heatsink/fan to help keep it cool and found a very nice & cheap one on Amazon
https://www.amazon.co.uk/gp/product/B07JGNF5F8
This meant I had to increase the height of the top section of the case to allow the heatsink to fit.
To mount the accessory tray, I used some M3 standoffs and attached them to the VESA mount holes on the main case.
Why not build your own ADS-B tracking station?
https://www.flightradar24.com/build-your-own
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
200
Infill:
30
Category: Electronics