Peak Design LENS Kit Canon RF Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An RF mount version of the Peak Design Lens kit.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to have an RF mount version of the Peak Design Lens Kit. As they seem to have deprecated this product, I decided to model my own adapter ring. I would not recommend printing in plastic, but this is possible; that is how I tested the fit. Test prints using ASA. Final is out of stainless but aluminum would be fine too.
I used PCBway to metal 3d print the model. Then, to get a smooth finish on the mating surface, I used fine wet sandpaper on a glass bed to ensure flatness. It is always good to breathe new life into old products and keep them alive. Good luck and happy printing.