Peak Design LENS Kit Canon RF Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An RF mount version of the Peak Design Lens kit.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 45
- Makes
- 0
- Views
- 546
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I wanted to have an RF mount version of the Peak Design Lens Kit. As they seem to have deprecated this product, I decided to model my own adapter ring. I would not recommend printing in plastic, but this is possible; that is how I tested the fit. Test prints using ASA. Final is out of stainless but aluminum would be fine too.
I used PCBway to metal 3d print the model. Then, to get a smooth finish on the mating surface, I used fine wet sandpaper on a glass bed to ensure flatness. It is always good to breathe new life into old products and keep them alive. Good luck and happy printing.