Antenna Recreation for Toyota IS200 IS300 Altezza Gita Sportcross
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Antenna Recreation for Toyota IS200 IS300 Altezza Gita Sportcross
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 844
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way.
So I got replacement then modeled it the best I could to match to the original toyota part
You will need your original to dissemble and a M5×7×10 Blind insert (https://www.ebay.com.au/itm/124721762076?var=425700860727)
I printed mine in ASA grey, soldered the wire to the blind side of the insert then pushed it through the top with a soldering iron.
Reassembly from there is easy enough, screws should self tap
I would recommend a bit of silicon between the base of the print and the base edge like toyota had to keep it sealed, put the rubber foot back on and install into car.
Finish work would be necessary if you wanted to remove the layer lines