1 / 2
Schablone, für z.B. Schubladengriff, Auszug,Ladeflächenauszug. — zdjęcie 1
1 / 2

Schablone, für z.B. Schubladengriff, Auszug,Ladeflächenauszug.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Eine Schablone um einen Griff auf ein Werkstück anzuzeichnen.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
237
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Ich brauchte eine Schablone um möglichst genau einen Griff in eine Schublade zu bekommen.

Infill 100% 

Pla+ 

druck zeit ca. 20 minuten.

skaliert auf 60% 

 

Man legt die Schablone an die gewünschte Stelle, zeichnet dann innerhalb der Schablone an ( den bereich der entfernt werden soll ) und dann kann man mit einer Mehrkranzlochsäge 4 x einbohren je nach skalierung und der rest muss abgefeilt werden.

<hr>

I needed a template to get a handle in a drawer as accurately as possible.

Infill 100%

Pla+

printing time approx. 20 minutes.

scaled to 60%

 

You place the template in the desired location, then mark within the template (the area that is to be removed) and then you can use a multi-ring hole saw to drill in 4 times depending on the scaling and the rest has to be filed down.

 

Necesitaba una plantilla para colocar un tirador en un cajón con la mayor precisión posible.

Relleno 100%

Pla+

tiempo de impresión aprox. 20 minutos.

escalado al 60%

Coloca la plantilla en la ubicación deseada, luego marca dentro de la plantilla (el área que se va a eliminar) y luego puede usar una sierra perforadora de anillos múltiples para perforar 4 veces dependiendo de la escala y el resto debe limarse. abajo.

Tagi