Schablone, für z.B. Schubladengriff, Auszug,Ladeflächenauszug.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eine Schablone um einen Griff auf ein Werkstück anzuzeichnen.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Ich brauchte eine Schablone um möglichst genau einen Griff in eine Schublade zu bekommen.
Infill 100%
Pla+
druck zeit ca. 20 minuten.
skaliert auf 60%
Man legt die Schablone an die gewünschte Stelle, zeichnet dann innerhalb der Schablone an ( den bereich der entfernt werden soll ) und dann kann man mit einer Mehrkranzlochsäge 4 x einbohren je nach skalierung und der rest muss abgefeilt werden.
<hr>
I needed a template to get a handle in a drawer as accurately as possible.
Infill 100%
Pla+
printing time approx. 20 minutes.
scaled to 60%
You place the template in the desired location, then mark within the template (the area that is to be removed) and then you can use a multi-ring hole saw to drill in 4 times depending on the scaling and the rest has to be filed down.
Necesitaba una plantilla para colocar un tirador en un cajón con la mayor precisión posible.
Relleno 100%
Pla+
tiempo de impresión aprox. 20 minutos.
escalado al 60%
Coloca la plantilla en la ubicación deseada, luego marca dentro de la plantilla (el área que se va a eliminar) y luego puede usar una sierra perforadora de anillos múltiples para perforar 4 veces dependiendo de la escala y el resto debe limarse. abajo.