1 / 4
Eufy SoloCam S340 Corner mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transform your Eufy Solo Cam S340 into a versatile security device with this custom-designed 3D printed corner mount
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 257
- Wydruki
- 0
- Wyświetlenia
- 1871
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (49)Powiązane
Achieve optimal camera angles and maximize your surveillance coverage!
Transform your Eufy Solo Cam S340 into a versatile corner-mounted security device with this custom-designed 3D printed corner mount.
Make sure to use filament that can withstand outdoors!
Printing instructions:
- Calibrate your printer and add a brim of at least 10mm.
- When printing with ASA: Make sure to preheat your printer and use the highest possible temperature during printing.
- Pause printing at layer 53 and insert 3 M3 nuts in the provided holes. Ensure they are fully seated and flush with the surface.
- Resume printing to complete the model.
Mout / Install instructions:
- Retrieve the wall mount that came with your SoloCam S340.
- Attach the provided wall mount to the printed corner mount using 3 M3 bolts.
- Align the mount with your desired position and mark where you want to drill holes.
- After drilling and inserting the appropriate wall anchors, attach the mount to the wall using the holes in the print and clip on the camera.
Done and dusted!
Non-3D printed parts needed:
- 3x M3 Nuts
- 3x M3 Bolts
- Wall mount that came with your SoloCam S340